The Shelly Wave 2PM smart relay module is a smart device with a consumption meter that can be installed in an assembly box, can control two 230V AC circuits.

The Shelly Qubino Wave product line uses the Z-Wave protocol for communication, so you will definitely need a Z-Wave Hub or USB coordinator to use the relay module.

The module can be powered by both direct current and alternating current voltages. It is also equipped with protection against overheating and overload, so it guarantees safe operation even in a small space installed in wall sockets.

The Shelly Wave 2PM 230V AC powered smart relay module with consumption meter is a member of the Shelly Wave product family, which uses the Z-Wave protocol for communication (868.42 MHz in Europe). Since Z-Wave is a smart home protocol, it was specially developed for communication between smart devices. Thanks to the sub-gigahertz frequency, signal propagation is adequate, and thanks to the Z-Wave MESH network topology, devices further away from the central unit can also communicate properly (devices under continuous power supply act as signal transmitters). Z-Wave devices definitely need a Z-Wave Hub or USB coordinator (which is connected to a miniPC, for example) to work. The Z-Wave protocol uses standardized communication command classes (Command Class), so even hundreds of thousands of products from different brands are compatible with each other, devices of a Z-Wave system can work together forming a network. A Z-Wave network max. It can contain 232 devices. Another advantage of the Z-Wave protocol is that it also supports association groups (Association Groups), thanks to which we can create direct associations between the individual units that make up the network. Another advantage of Z-Wave devices is that many parameters can be set on them at the protocol level, so they can be customized to meet even the most sophisticated needs.

The Shelly Wave 2PM smart relay module can be powered from direct current 24V-30V DC or 230V AC alternating current voltages, and on its output terminals it switches the voltage used for powering up. The manufacturer provided the module with protection against overheating and overload, so it guarantees safe operation even in a small space installed in wall sockets.

The module is also capable of controlling 2 circuits, 2 x 10A, a total of max. With an output capacity of 16A. It is capable of measuring consumption on both circuits.

Pairing:

- The module has an "S" button, which is a function button.
- During pairing, removal or factory reset, we can start the processes with this button. These functions are available for a limited time after powering up.

Pair/Uninstall/Factory Reset:

- Press and hold the "S" button to pair until the status LED turns blue.
- Then directly pressing the "S" button again (for at least 2 seconds) starts the pairing/removal state.

Specifications:

- Output: 2 pcs 110-230 VAC / 24-30 VDC
- Maximum Current: 230 VAC 16A (with resistive load), 30 VDC 10A (with resistive load)
- Low standby consumption: 0.3 W.
- Communication protocol: Z-Wave 800
- Z-Wave frequency: 868.4 MHz (EU)
- Range: up to 40 meters inside a building (walls and slabs may reduce it)
- Consumption measurement: YES
- SmartStart: YES
- S2 encryption: YES
- Z-Wave repeater function: YES
- Wireless Firmware Update (OTA): YES
- Operating temperature: -20 +40 °C
- Size: 37 x 42 x 16 mm
- Weight: 37g

Description:

- Manufacturer: Shelly
- Product type: Smart Z-Wave switch relay with consumption meter
- Colour: Black

Installation / operation

- Operating power supply: 110V-240V AC, 24V-30V DC
- Connection: 24V-30V DC, AC (phase and zero)
- Fixing/mounting: Can be mounted in a wall socket or can be mounted on a DIN rail using a DIN rail adapter, which can be ordered separately
- Can be mounted on DIN rail: Yes, with Shelly DIN adapter (separate product)
- Operating ambient temperature: 20°C-40°C
- Operating ambient humidity: 30%-70% RH
- Max. energy consumption: 0.3W

Controlled (/measured) circuit

- Switch / switch relay: Yes
- Dimming / Brightness control: No
- Consumption measurement: Yes
- Number of circuits: 2
- Number of switched poles: 1P
- NO/NC switching: No
- Rated voltage: 110V-240V AC, 24V-30V DC
- Nominal current: 16A (AC), 10A (DC)

Electrical properties

- Local / manual switching: No
- Input for external switch: Yes
- Alternative switching / crossover switching: Yes
- Overheating protection: Yes

Supported protocols

- Wi-Fi: No
- Zigbee: No
- Thread: No
- Z-Wave: Yes, also a Z-Wave repeater
- RF / radio control: No
- Bluetooth: No

Remote control, smart control

- Direct (local) remote control: No
- Can be controlled remotely via the Internet: depending on the Z-Wave gateway
- Cloud mode (with factory firmware): depending on the Z-Wave gateway
- Local network mode (with factory firmware): depending on the Z-Wave gateway

Smart functions

- Can be timed: Yes

Other

- Dimensions: 4.2 ×