The exemplary adapter depicts the connection of a Guide Ta435 heat camera. For newer devices where our website does not mention the epistle, it usually already has the trajectory with the M52 x 0.75 thread shown in the middle figure. In these cases, it is enough to buy a stroke, but products such as products, eg. Certain Pulsar products, where the front part of the front is, for example. Bayonet lock on the opposite side of the march. In such cases, the necessary accessories are marked below the product. The clamping adapter can only be connected to the appropriate M52 x 0.75 ride on the thermal camera side. You must purchase the outer tube diameter of the front lens of the target binoculars. As a point, you can take the data in the following table, which will be clicked: Ruan adapter / Kengyel Dimensions According to the target binoculars types, the table shows a list of different brands. The vertical columns show possible external diameters. Behind the name of the target binoculars is the diameter of the front lens in the first column, while the second column shows the diameter of the outer tube at the same point. The green cells reinforce this second value, so the size of the size to be selected. By selecting this from the size selector, you can select the appropriate adapter by checking the data by checking the data. The middle image adapter is not included in the product and must be purchased separately for the appropriate device.