The Ermenrich Seek VE80 industrial endoscope is a professional multifunctional device with a diameter of only 6.2 mm and a 90° rotatable camera. The borehole tester can be used to check the quality of repair and construction work, the general condition of properties, and to find the source of moisture, mold and frost. Thanks to the flexible, thin probe, the user can easily inspect hard-to-reach cavities and fittings (electrical lines, pipes, manholes, etc.) inside the wall. Cable length: 3 meters. The endoscope is equipped with a backlight consisting of six powerful LEDs around the camera lens, which allows it to be used even in complete darkness.

The camera of the probe is rotatable - it can be turned left or right with the wheel on the handle of the endoscope. The rotation angle is 210°. The Ermenrich Seek VE80 uses the high-resolution, low-noise, natural color rendering OmniVision CMOS matrix for imaging. The image is displayed on the 4.3" IPS display. One of the main features of the device is the built-in recording unit. It supports photo and video recording with resolutions of 1920x1080 px, 1280x720 px and 640x480 px. The device supports TF memory cards up to 32 GB in size, which can be used for long-term storage of recordings. Photos and videos can be easily transferred to a computer with a TF card reader or USB C type. using a USB cable.

The Ermenrich Seek VE80 industrial endoscope is powered by a built-in 2600 mA h 3.7 V battery, which can be charged with a USB Type-C cable and 5 V adapter. In order to save energy, the device has an (optional) automatic switch-off function that activates after 3, 5 or 10 minutes of inactivity. It also has a low-charge warning function. The endoscope can operate continuously for at least 3 hours with a fully charged battery.

The housing of the Ermenrich Seek VE80 is made of high-strength engineering grade ABS plastic. The camera lens and LEDs have strong water and dust protection - IP67 (the device itself is not protected against water and dust). The wide operating temperature range from -10 °C to +50 °C allows the device to be used in most residential and business environments. The temperature sensor built into the probe prevents accidental damage to the electronic components if the temperature in the place of use is extreme. It will turn off the camera if the temperature is already too hot (90 °C) for the safe operation of the device.

- 210° rotatable camera with a 90° viewing angle
- High resolution photos and videos: 1920x1080 px
- 4.3" IPS color display with natural color reproduction and a clear image
- The built-in battery is fully charged in 4 hours
- Low battery level indicator, automatic shutdown function and temperature sensor
- OmniVision low noise color CMOS sensor
- TF card supported up to 32GB
- Circular digital zoom: 1x/1.5x/2x steps

Contents of the set
- Endoscope
- Type-C USB cable
- Wipes
- Carrying case
- Instruction manual and warranty card