LEVENHUK Ermenrich BASE LT20 laser leveling lila

check out the Ermenrich BASE LT20 laser level, this universal tool for construction, renovation and construction work. The device is equipped with two laser diodes projecting red lines crossing each other. The leveler can be placed up to 15 m away from the surface on which you want to project the laser. The horizontal and vertical projection range is 130°. The compensator adjusts the lines projected by the laser áBASE LT. Thanks to the low measurement error, you can mark the room as accurately as possible.

The Ermenrich BASE LT20 can be placed on a horizontal surface or mounted on a standard stand. By using a stand with a tilting head, you can tilt the level according to the desired laser setting. The device is protected against dust and splashing water, which is particularly useful in renovation and construction environments. The leveler works with standard batteries. 10 brightness levels can be set.

- It projects two red lines
- The projection range of the horizontal and vertical planes is 130°
- Can be used from a distance of up to 15 m, has a self-adjusting leveling system
- Works with batteries that provide up to 180 hours of operation time with a single töBASE LT (at minimum brightness)
- Dust and splash resistant and mounts to 1/4" tripod thread

Technical data
- Laser level type: 1H/1V, 2 lines
- Number of horizontal planes: 1
- Horizontal projection range (°): 130
- Number of vertical planes: 1
- Vertical projection range (°): 130
- Accuracy: ±1.5 mm/5 m
- Maximum working distance: 15 m
- Laser beam color: red
- Self-adjusting leveling system: Yes
- Operating range of the compensator (°): 4±1
- Pulse mode: Yes
- Can also be used with a stand: standard 1/4" thread
- Power supply: 4 AA batteries (not included in the set)
- Brightness control: Yes
- Battery operating time (hours): 40 — 180
- Laser class: 2
- Wavelength, nm: 635–670
- Water and dust resistance IP rating: IP54, partially dustproof and splashproof, partially dustproof and splashproof
- Operating temperature range, °C: -10...+50

The kit includes the following
- Laser level
- Bag
- L-shaped stirrup
- User manual and warranty card