With a maximum output of 16,000 l/h, the SP 16,000 Dirt dirty water pump reliably pumps dirty water containing up to 20 mm dirt particles, for example from garden ponds or flooded basements. In case of heavy contamination, an optional pre-filter protects against clogging. In order to ensure a longer service life, the sliding ring seal known from the Professional series is installed. The submersible pump has a float switch for automatic on and off. The float is also attached to a rail and can be adjusted vertically for low pumping. In manual mode, it can pump up to a residual water level of 25 mm. And with the Quick Connect connection thread, it enables quick and easy connection of 1", 1 1/4" and 1 1/2" hoses.

- Made for polluted water
- Reliable pumping of water up to 20 mm dirt particles
- The possibility of fixing the float switch
- For switching to continuous operation
- Comfortable carrying handle
- It can be held comfortably and can also be used as a rope holder
- Robust and easy to attach pre-filter as accessory
- Protects the pump from excessive contamination and prevents clogging of the pump impeller

Technical data
- Engine power max. (W): 550
- Water delivery max. (l / h): < 16000
- Delivery temperature (°C): max. 35
- Transport height (m): 8
- Pressure (bar) max.: 0.8
- Grain size (mm): max. 20
- Immersion depth (m): max. 7
- Min. residual water, manual (mm): 25
- Height of remaining water (mm): 25
- Connection thread: G1 1/2
- Pressure side thread size: G 1 1/2 inner diameter
- Power cable (m): 10
- Supply voltage (V): 230 240
- Frequency (Hz): 50
- Color: yellow
- Weight without accessories (kg): 4.9
- Packaging weight (kg): 5.7
- Dimensions (length x width x height) (mm): 229 x 238 x 303