Thanks to the 30 m long connection cable, the BP 6 Deep Well submersible pressure pump can also extract water from deeper wells. Whether it is about watering the garden or domestic water supply, with the pressure switch and groundwater from your own (deep) well, you can save several liters of expensive drinking water. The pump casing and threaded stub are made of stainless steel and are therefore extremely robust. An integrated pre-filter protects the water inlet of the pump with a support leg and reliably protects it from dirt after assembly. The pump can be safely lowered into the shaft with the attached 30 m anchor rope. Thanks to the separate on/off switch at the end of the cable, the pump can be used comfortably and safely. As a basic accessory, it includes a 3/4" and a 1" hose connection set, which hoses can be connected to the pump without any problems. With built-in non-return valve.

Pump housing and threaded connection made of stainless steel
Longer service life and better fixability

30 meter connection cable
Safe use from deeper locations

Pump with connecting piece and non-return valve
The pump can be connected more quickly to the hoses (3/4" and 1").

- Engine power max. (W) 1000
- Water delivery max. (Water transport (l/h)) 5000
- Water delivery height / pressure max (m) 55 / 5.5
- Immersion depth max. (m) 27
- Delivery temperature, max. (Temperature (°C)) 35
- Dimensions (length × width × height) (mm) 105 / 105 / 810
- Connection thread G1
- Connection cable H07RN-F / 30
- Voltage (V) 230
- Frequency (Hz) 50