EK-Classic InWin 303EK is a unique version of the popular In Win 303 housing. It has an integrated distro plate and this makes it really special as there is no similar product on the market. This is the only mass-produced housing that has been specifically redesigned and modified to seamlessly integrate a coolant distribution plate with a high-performance DDC pump.

The 303 is one of InWin's most popular houses that has been on the market for quite some time. This is a proven case with interesting fan and radiator layout options. The 303EK version takes this to a new level, while with the purchase of the housing, the customer receives a fully integrated coolant tank and pump in the form of a manifold.

It is easy to install hard pipes in the integrated distro plate, where only a small amount of bending of the pipes is required. It's truly an all-in-one solution that includes a pump and reservoir equipped with several industry-standard G1/4" threaded inlets and outlets. It can support one CPU and up to two GPUs and a top-mounted radiator.

The coolant distribution plate is equipped with a small DDC 3.2 pump that can provide up to 1000 liters of coolant flow per hour. The pump is driven via a 12V Molex connector and the pump speed can be adjusted using a standard PWM cable connected to the motherboard or controller.

ATTENTION

- The DDC pump uses a water-lubricated, i.e. wet rotor design. It is therefore strongly recommended not to run the pump dry.
- The liquid cooling parts are for display only and are not part of the case
- Do NOT install this product with any aluminum Fluid Gaming parts!
- If there is no PWM signal, the DDC pump rotates at 100% speed.
- Do not clean the distribution plate with alcohol (IPL)!