If the device's display is curved or rounded on the edges, the standard glass will cover only the flat surfaces for optimum traction.
Please note that for some phones, the glass can be much smaller and narrower than the display size!
If this standard glass property would interfere with you, please select the EazyGuard Myscreenprotector 2.5D and 3D FullCover FullCover glass!

The fully transparent hardened protective glass has the highest level of scratch protection (9H).

Useful information to install glass film

- Use the wet wipe before installation, degreasing the surface, removing all dirt, making sure that dust or lint does not get on the display.

- Then wipe the display dry, making sure that dust or lint is not to be reduced.

- Carefully pull off the foil layer 1, which can be discarded. We will not need it anymore.

- Grab the bottle with both hands at the four corners and paste it exactly from above.

- We do not accidentally grab this "sticky" surface, and be sure to cut the speaker or buttons in the right place or run parallel to the pages.

- Gently let the device.

- If you have been able to fit it exactly, press the bottle slightly, with a new one in the middle, which will spread from the center and stick to the display.

- Possible air bubbles (provided they are not dust or lint underneath) are absorbed within 1-2 days.