The Godox QT series is available in several power versions, up to 1200Ws, and is characterized by a 7-step range of flash power control (1/1 - 1/128, with an accuracy of 0.1 EV). Recharging full flash energy takes less than 0.9 seconds. At minimum power, it achieves a very short flash time of only 1 / 28984s, which allows free shooting during sessions. The color temperature of the flash is 5600K, and depending on the set flash energy, it can fluctuate within ± 200K. We have several lamp modes available, of which the Stable Color Temperature deserves attention.

The built-in System X receiver allows for remote flash triggering (up to X-Sync), flash power control and more. In addition, the Godox QT series is equipped with a USB connector that allows you to connect XT16, FT-16 or X1 TTL system receivers. It is also possible to use the 3.5 mm Jack socket and connect the lamp to triggers of other brands.

The back of the lamp is simple and functional. The LCD display, which shows the settings of the lamp, is easy to read even from a wide angle. Next to it is a practical button for changing the flash output, the radio communication channel and the lamp group. The five buttons located below the LCD display provide quick access to all settings and functions of the lamp. The 150W halogen pilot light can operate independently of the flash output (brightness can be adjusted manually) or linked to the flash power (proportional). It can also automatically turn off for a flash or stay on all the time.

With the lamp you can use a wide range of light shaping tools such as: bowls, softboxes, reflectors, beauty plates and others equipped with Bowens accessories.

- Operating mode: HSS, manual
- Power: 600 Ws
- Power span: 1/1 1/128
- Reload time: 0.05 0.9 sec
- Setting light: 150 W
- Flash trigger compatibility: XT16, FT16, XT32, X1