The GL-C-201P Gledopto Pro is a new member of the professional LED control product family with Zigbee 3.0 + RF receiver. It can operate in 5 modes: RGBCCT, RGBW, RGB, CCT (WW/CW) and Dimmer, and it can also control 12V – 24V DC LEDs with functions suitable for the type of LED (color adjustment, color temperature adjustment for white light, brightness -regulation), so it is compatible with almost all LED lighting. It has a pair of terminal blocks suitable for receiving a wall push button.

Compatible with eWeLink (Sonoff and SmartWise) Zigbee Bridge, Tuya / SmartLife Zigbee gateways, Philips Hue bridge, some Amazon Zigbee bridges, Aeotec SmartThings hub, and Terncy (Apple Homekit compatible ) with a Zigbee gateway and a number of other systems as well.

Not only can it be automated and controlled remotely from an app via Zigbee, but it can also be controlled remotely with Gledopto's 2.4GHz RF remote control and wireless RF wall panel, and it also has an input for push-button switches, so it can also be controlled from wall switches (can be switched on/off and brightness can be adjusted).

Description:

- Manufacturer: Gledopto
- Factory article number: GL-C-001P
- Product type: Zigbee smart LED control

Installation / operation

- Operating power supply: 12V or 24V DC
- Connection: must be connected after a 12V or 24V power supply
- Can be mounted on a DIN rail: No
- Operating ambient temperature: 20°C-45°C
- IP protection: IP20

Controlled (/measured) circuit

- Switch / switch relay: Yes
- Dimming / Brightness control: Yes
- Consumption measurement: No
- Number of circuits: 1
- Number of switched poles: 1P
- Rated current: 20A (max. total)

Electrical properties

- Local / manual switching: No
- Input for external switch: Yes, for push button switch(s).
- Alternative switching / crossover switching: Can be controlled from several Gledopto RF wall panels and RF remote controls

Supported protocols

- Wi-Fi: No
- Zigbee: Yes, Zigbee 3.0
- Z-Wave: No
- RF / radio control: Yes, 2.4GHz RF receiver
- Bluetooth: No

Remote control, smart control

- Direct (local) remote control: remote control from Gledopto wireless 2.4GHz RF remote control and wall switch panel
- Can be controlled remotely via the Internet: Yes, if connected to a Zigbee gateway
- Cloud mode (with factory firmware): depending on Zigbee Bridge
- Local network mode (with factory firmware): depending on Zigbee Bridge
- MQTT support (with factory firmware): Zigbee2mqtt compatible

Smart functions

- Notification functions: depending on Zigbee Bridge
- History: Depending on Zigbee Bridge

Other

- Dimensions: 12.5 × 3.7 × 2.4 cm