The iconic and popular Neo 2 Smart smart roller has a quiet and very powerful direct drive. The bike has been designed to give you an even better indoor cycling experience, especially on climbs or sprints.

The NEO 2T Smart has become even quieter and is undoubtedly the strongest, most accurate and most realistic cycling trainer.

News:
Even quieter: significant reduction of noise from air movement and vibrations.
A more realistic cycling experience: thanks to the powerful motor, it gives a much more realistic experience when climbing and sprinting.
Wider compatibility: directly compatible with 135x10, 142x12 and 148x12mm axles.

Complete silence
Thanks to the redesign of the magnets, the NEO 2T Smart has become significantly quieter. The noise caused by the movement of the air and the vibrations transmitted to the ground at low revolutions are reduced. Thanks to this, the trainer is quieter than we could have ever imagined.

Powerful climbs and sprints
The newly designed motor of the NEO 2T Smart gives you the real feeling of riding a bike even on uphills or when accelerating. The motor has become more powerful, so it can deliver a stronger load in situations such as climbing or sprinting.

Pedal stroke analysis
The NEO 2 also had left and right capacitive sensors that accurately measure the position of both your feet. By adding the ANT+ bicycle dynamics measurement, you can analyze the pedal stroke in other developers' software, or even with a Garmin Edge bicycle computer.
(Not available on Mac and Tacx Training.)

Accuracy
The Tacx NEO 2T Smart measures your power (Watts) extremely accurately, and no calibration is required. Power measurement accuracy: 1%.

It feels like a bike
The NEO 2T Smart is very sensitive and reacts immediately to changes in speed or slope. Through its dynamic inertia, it compensates for speed, weight and angle of ascent to achieve the most realistic and smooth cycling feel.

Compatible with countless axles
The axle of the NEO 2T Smart has been redesigned to be compatible with as many bikes as possible without the use of adapters. Thus, it is compatible with all bicycles, you only need to use the adapter for sizes 135x10 and 135x12.

The feeling of the real road
Experience the vibration on cobblestones, gravel roads, or other surfaces! This special service is a specialty of the NEO series, which you can take advantage of with Tacx movies or when using the Zwift software.

Slopes
Starting from the top of a hill or mountain, it is always exciting to accelerate down the slope. This trainer gives you that feeling, the NEO 2T Smart accelerates you on the slope.

Stable and flexible
The design of the NEO 2T Smart allows for a few degrees of left and right movement while turning. The structure follows the natural movement of your body, and this freedom enhances the feeling of real cycling.

Even without external power supply
The NEO 2T Smart does not necessarily require an external power supply, it can also operate with the energy produced by cycling. Slope simulation will only be active when an external power supply is connected.

General Information
The warranty of direct resistance and free-wheeling rollers can only be guaranteed with the recommended training rubber. The material composition of training tires and, in the case of MTB tires, their width, ensure optimal friction with the surface of the rollers. Assembly instructions: For freewheeling and direct resistance rollers, the following tools are required: Allen key: 4-5-6; Flat and Phillips screwdriver. In the case of Flow and Neo, additional tools are required: Cassette wrench, chain wrench for fitting the gear ring.