According to the philosophy of the Finlux brand, boilers should primarily be suitable for their intended use. Therefore, in the planning phase, we focus on the most important functions in everyday life.

The biggest advantage of household appliances is their minimalist design and problem-free operation. Discover the world of Finlux products and see for yourself that the power lies in simple solutions.

- ECO mode
- Smart Clean
- Protection against freezing
- Waterproof design

Uniform insulation

The insulation is provided by 50 mm thick polyurethane thermal insulation material. The even distribution of thermal insulation in Finlux boilers can reduce energy consumption by up to 10%.

Reducing energy loss

The special design of the fastening elements and the way they are connected to the boiler housing significantly reduces the formation of so-called thermal bridges, thereby reducing energy loss by up to 7.5%.

Stainless steel heating element

The main elements of Finlux boilers are made of high-quality stainless steel. The manufacturer performs a 500-hour control test (international standards require only 96 hours), during which the heating element is exposed to extremely corrosive conditions.

Prevention of overheating

The thermostat automatically switches off the boiler before the water temperature becomes dangerous for the users of the boiler, thus preventing the water from overheating.

Safety

When the operating pressure of the boiler increases due to the high water pressure in the water line, the water starts to drip through the safety valve, warning the user.

Intelligent cleaning function

If the water temperature does not rise above 65°C for a week, the boiler automatically activates the intelligent cleaning function, thus preventing the establishment of microorganisms. The water temperature rises above 65°C and remains at this temperature for one hour. The "Intelligent cleaning" icon informs you that the function has been activated.

Eco mode

The dynamic eco function is activated when the water temperature is set to 55°C. This is the optimal temperature for product life and energy savings. With the dynamic eco function, you can save up to 10% compared to traditional eco functions.

Low water protection

If there is no water in the tank, the blocking algorithm is activated and the error code E3 is displayed. In this case, unplug the device from the electrical outlet and wait until the water level is restored.

Protection against low water temperature

If the boiler's water temperature drops below 5°C, the boiler automatically switches on and heats the water to 16°C.

Low voltage protection

Fluctuations in the supply voltage affect the heating element, electronic board and other electrical components. If the voltage drops to 160V or below, Finlux boilers stop working until the voltage reaches the value required for operation.

Other features:

- Water temperature range: 25-75 °C
- Type of equipment: Can be mounted on the wall
- Control: Digital control
- Energy class (EU): C
- Annual electricity consumption: 559 kWh
- Noise level: 15 dB
- Capacity: 35 l
- Heating element material: 316L stainless steel
- Energy consumption: 1500 W
- Supply voltage: 220-240 V
- Frequency: 50/60 Hz
- Heat loss at 65°C: 0.8 kWh/24 hours
- Heating time 10–65°C: 90 minutes
- Number of internal tanks: 1
- Tank material: cold steel
- Tank housing thickness: 1.5 mm
- Tank diameter: 380 mm
- The thickness of the enamel layer of the container: 200-600 μm
- Type of insulation: polyurethane
- Insulation thickness: 20~ 30 mm
- Protective anode: magnesium
- External cladding: painted cold steel
- Current: 7 A
- Thermal release: 100 °C
- Protection against moisture: IP24
- Maximum operating pressure: 1 MPA
- Power cable length: 1.2 m
- Boiler shape: square
- Tank colour: grey
- Upper/lower cover colour: grey
- Water connections [inch]: G 1/2'
- Product size: 430x456x481 mm
- Packaging size: 494x494x580 mm
- Weight (net/gross): 18/21 kg