The Fibaro Smart Implant is an accessory with which you can integrate the devices you already have in your home into the Fibaro system. The devices added in this way become accessible and controllable via the Z-Wave network without wires or presence. In addition to the built-in thermometer, it can also receive signals from many other sensors and open/close the output contacts based on their data or independently of them.

- Compatible with any certified Z-Wave or Z-Wave Plus controller
- Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG based encryption
- Works as a Z-Wave signal repeater
- Allows you to connect sensors: 6 DS18B20 sensors, 1 DHT sensor, 2 x 2-wire analog sensors, 2 x 3-wire analog sensors, 2 x binary sensors
- Built-in temperature sensor
- Z-Wave Plus
- Power supply: 9-30V DC ± 10%
- Inputs: two 0-10V or 1 input with 1 serial line
- Outputs: 2 potential-free outputs
- Supported digital sensors: 6 DS18B20 or 1 DHT22
- Maximum current at the outputs: 150mA
- Maximum voltage on the outputs: 30V DC / 20V AC ± 5%
- Built-in temperature sensor measuring range: -55°C to 126°C (-67°F to 259°F)
- Operating Temperature: 0-40°C (32-104°F)
- Radio protocol: Z-Wave (500 series chip)
- Radio frequency: 868.4 or 869.8 MHz EU; 908.4, 908.42 or 916.0 MHz; 921.4 or 919.8 MHz ANZ; 869.0 MHz RU
- Radio transmission power: max. 7dBm (EIRP)
- Range: up to 50m (164ft) outdoors, up to 40m (131ft) indoors (depending on terrain and building structure)
- Dimensions (L x W x H): 29 x 18 x 13 mm (1.14” x 0.71” x 0.51”)
- Compliance with EU directives: RoHS 2011/65 / EU, RED 2014/53 / EU