The Einhell TE-RH 32 4F Kit hammer drill is a 1,250-watt device with four basic functions that are essential for remodeling and renovation work: screwdriving, drilling, hammer drilling, chiseling with chisel attachment and without chisel attachment. If you really need penetrating power, then only the hammer drill can help! It can even handle stubborn and hard-to-work materials like stone or concrete. The impact pulses weaken the material, and the hammer almost chews through the material with its rotating cutting motion. You can also use the hammer drill for demolition work: the perfect solution for hard materials - e.g. concrete, brick and stone - for breaking or splitting. The max. Transmitting an impact force of 5 joules to the tool, the pneumatic impact drill moves through concrete like a knife through butter: this is helped by the 32 mm drilling power. The robust aluminum gear head increases the durability of the hammer drill and guarantees a longer service life. The LEDs indicate whether the device is ready for use or warn if the carbon brushes are worn out and need to be replaced. The Press-Control function helps you to always exert the optimal force necessary to complete the work when using the device. The large Softgrip surfaces, as well as the ribbed, extendable handle ensure a firm grip and hold. The anti-vibration handle minimizes vibration during use. Overload protection (slip clutch) guarantees maximum safety. The hammer drill is equipped with a robust, universal semi-automatic SDS-plus chuck. With the help of the speed control electronics, you can always adjust the speed to the specifics of the work to be done. The device is supplied with a continuously adjustable hole depth stop made of carbide. You can buy the device in an Einhell E-Box case, with 3 drill bits (Ø 8, 10, 12 mm), as well as pointed and flat chisels.

- 4 functions: drilling / hammer drilling / chiseling with or without chisel attachment
- Sliding clutch for greater safety
- Large Softgrip surface for comfortable working
- Pneumatic hammer mechanism for working with a wide variety of materials
- Robust, universal SDS-Plus semi-automatic chuck
- Speed ​​control electronics that can be adjusted to the specifics of the material to be processed and the area of ​​use
- The vibration-reduced handle protects the user from force effects
- Strong and extremely durable aluminum gear housing
- Press-Control function for optimal effort
- 2 status indicator LEDs: ready for operation and service (the carbon brushes are worn out)
- Infinitely adjustable hole depth stop made of carbide
- Strong, ribbed, pullable replacement handle
- with 3 drill bits (Ø 8, 10, 12 mm) and flat chisels
- In a practical E-Box case

Specifications
- Electrical network: 230 V | 50 Hz
- Power: 1250 W
- Idle speed: 0-850 min^-1
- Beat rate: 0-4100 min^-1
- Impact strength: 5 J
- Tool holder: SDS-plus
- Drilling performance (concrete): 32 mm