CATA Duralum TF-2003/60 LED Dehumidifier 60 cm C inox
not available
Product description
Minimum installation height is 75 cm for gas hob and 65 cm for electric sheets. The 60 cm version is also available with black white glass and duralum front. The latter is an inox and aluminum alloy, a brushed version, and a fingerprint -free surface. The 60, 70 cm device is only available with Duralum front panels.
The power of the engine is 600 m3/h. Noise levels of the hood: 46-57 (db/a). Energy classification: Category C and annual electrical consumption of 44 kW/year. Controlling mechanical (2 -speed tilt switch) or separate lighting switch that switches the energy saving LED lighting. The engine and lighting only work if you pull out the hood hood. After finishing the cooking, it is recommended to turn off the exhaust.
The Cata TF-2003 series is designed to be installed in a kitchen furniture in the top closet. Installation is quick and easy, thanks to the mounting points on the top and on the side. The spacer is used to bridge the distance between the hood and the wall. In the hood hood you can find all accessories to install the device. Its front panel is removable, so it can be equipped with the same front panel as kitchen furniture. The exhaust air leaves the outdoors via a pipeline (exit mode) to be connected to a 120 or 125 mm diameter opening using a pipe stump. It is forbidden to introduce it into channels and chimneys used for combustion products!
Make sure that when the hood and other non -electric stove or stove operates at the same time, there is a sufficient amount of air supply. For proper operation, the ventilation of the room must be ensured through the doors, windows or other air intakes.
If you are unable to remove it, you can use it in internal circulation mode, but in this case, 2 active carbon filters must be installed in the opening below the metal filters. The air flows through the filters and returns to the room through the opening on the top of the extraction. The filter is not was washable, not regenerated and needs to be replaced every 3-4 months.
At the bottom of the device is metal fat filters. These should be cleaned once a month. For cleaning, use hot water, but the filters can also be washed in a dishwasher.
Other features:
- Form design: telescopic
- Width: 60 cm
- Color: Inox
- Control: tilt switch
- Number of motors: 1
- Air transport: 600/390 m3/hour
- Noise level: 46-57 (db/a)
- Printing value: 148 PA
- post -ventilation: yes
- Lighting: 2x3.5W Eco LED
- Pipe connection: 125 mm
- Energy class: C
- Weight: 9 kg