The compact aluminum Axagon EE25-XA6 AlineBox external case is a high-speed USB 3.2 Gen 1 (USB 3.0) interface 2.5 "for SATA hard drives or SSD.

The current SATA 6G interface UASP supports the speed of modern SSD discs. The trim option limits the gradual deterioration of SSD performance.

The S.M.A.R.T. Reading information can be used to monitor the condition of the external disk. It also supports the shutdown of the connected discs and the box.

The lightweight yet durable aluminum case provides perfect mechanical protection for the disc and has excellent heat distribution.

The polished, decent -shaped housing house guarantees an elegant style and prevents unwanted fingerprints.

Hard disks are easy to install and even a layman can cope with it and easily create an external drive.

Input:
- USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) Superspeed USB at up to 5 Gbit / s.
- Connect with USB Micro B nut connector.

Aid:
- SATA III - 6GB/S (600 MB/s) interface,
- Supports 2.5 "HDD/ SSD hard drives.

Properties:
-Completely compatible with S USB 3.2 GEN 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatibility with USB 2.0.
- Supports the following transmission speeds: 5000 /480 Mbit / s (Superspeed / HighSpeed).
- Supports 2.5 "SATA III/II/I HDD and SSD hard drives without limiting maximum capacity up to up to 9.5 mm.
- corresponds to the Serial ATA 3.0 specification (SATA/600) at up to 6 GB/s (600 MB/s).
- corresponds to the Serial ATA 2.0 specification (SATA/300) at up to 3 GB/s (300 MB/s).
- corresponds to the Serial ATA 1.0 specification (SATA/150) at up to 1.5 GB/s (150 MB/s).
- The total bandwidth / transmission speed of the case is determined by the USB 3.0 interface used (theoretically 5 Gbit / s).
- Supports UASP (USB Attached SCSI Protocol).
- SSD/HDD boot support in the external case.
- Full plug and play support.
- HDD Automatic Stop - Automatically shut down hard disk after a 10 -minute inactivity.
- HDD shutdown - stops the disk after removing the device or stopping the PC.
- Possibility to connect the device thanks to the support of Hot Plug.
- Connect with USB 3.2 Gen 1 micro B nut connector.
-Micro USB-B / USB-A cable, 64 cm long.
- The power supply to the USB 3.2 Gen 1 bus is enough up to 900mA for all USB ports.
- a pleasant blue LED that indicates connection to the computer's USB port (constant lighting) and the data transmission (flashing).
- Very simple disk installation - The disk is connected directly to the SATA connector of the motherboard, and after placing it in the case, all you have to do is secure the front panel with the two screws and screwdriver.

Further data:
- Outer case dimensions: 130 x 78 x 12.5 mm.
- External box weighs 75 g (USB cable and disk).

Supported operating systems:
- MS Windows XP / Vista / 7/8/8 / 8.1 / 10, Windows Server 2003/2008/2012/2016 or later (all 32 and 64-bit Windows), Mac OS X 10.x or later, Linux 2.6.x kernel or above.
- Note: The drivers are found in operating systems and are completely automatically installed. There is no need to install any other drivers and are not available.

Package contents:
- USB 3.2 Gen 1 external house 2.5 "SATA,
-Micro USB-B-USB-A 64 cm cable,
- Fixing screws and screwdriver,
- Multilingual Handbook Cz / DK / ENG / ESP / FIN / FIN / FR / GR / HR / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,
- Packed in a cardboard box.