The AXAGON ADSA-ST DUAL SuperSpeed ​​USB 5 Gbps docking/cloning station quickly and easily connects any SATA drive or even two drives simultaneously to the computer. The USB-B connector of the dock enables connection to a computer together with the supplied USB-B USB-A cable.

This handy tool is the easiest way to connect SATA drives to your computer or laptop. No assembly required as with an external box, just slide one or even two drives into the base at a time. Technicians will also appreciate the quick plate change.

UASP supported SATA 6G; interface allows you to take advantage of the speed of modern SSD drives. Support for the TRIM function that prevents gradual degradation of SSD performance over time. The S.M.A.R.T. the external hard drive can be monitored by reading information. Supports linking of attached drives and docking stations.

The station enables simple and quick cloning of the contents of connected drives without a PC connection. The dock can thus be used as an independent device for convenient copying and creating disc images. This is the easiest way to transfer the contents of one old HDD to another SSD, including a working operating system (Windows, macOS, Linux...). SSD cloning speed up to 300 MB/s.

The casing of the station is sufficiently robust and durable, which enables perfect stability of the station even with inserted plates. Rubber feet reduce the vibration of hard drives. The outer casing is made of aluminum with an elegant brushed surface.

Input:
- USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed ​​USB up to 5 Gbps.
- Speed ​​up to 5 Gbit/s
- Connect via USB-B female connection.

Aid:
- Interface SATA III - 6 Gb/s (600 MB/s),
- Supports 2.5" HDD/SSD,
- Supports 3.5" HDD,
- Max. hard disk capacity – without limitation,
- Max. 2.5" hard drive without height restrictions.

Features:
- Compatible with USB 3.2 Gen 2 / USB 3.1 Gen 1 (USB 3.0) backwards compatible with USB 2.0.
- Supports the following transmission speeds 5000 / 480 Mbit/s (SuperSpeed ​​/ HighSpeed).
- Meets the Serial ATA 3.0 specification (SATA/600) with a transfer speed of up to 6 Gb/s (600 MB/s).
- Meets the Serial ATA 2.0 specification (SATA/300) with a transfer speed of up to 3 Gb/s (300 MB/s).
- Meets the Serial ATA 1.0 specification (SATA/150), with a transfer speed of up to 1.5 Gb/s (150 MB/s).
- The total throughput / transmission speed of the station depends on the USB 3.2 Gen 1 interface used (theoretical 5 Gbit/s).
- Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport).
- Support for the TRIM function that prevents the gradual degradation of SSD performance over time.
- S.M.A.R.T., which monitors the state of the disks. (Self-Monitoring, Analysis, and Reporting Technology) system support.
- Supported booting from SSD/HDD in the docking station.
- Possibility to connect the device thanks to the support of Hot Plug.
- Full Plug and Play support.
- HDD Auto Spin down support - stop drives when idle.
- HDD Turn Off - Stops the disk after removing the device or shutting down the PC.
- Connection via a durable, large USB 3.2 Gen 1 B type connector.
- USB 3.2 Gen 1 cable type A male / type B female cable length 70 cm, included.
- 3x LEDs indicating HDD dock performance and disk activity in both axes.
- Station dimensions 142 x 102 x 80 mm.
- Weight 330 g.

Power supply:
- Power supply using a compact external AC/DC adapter 12V - 2.5A (30W), with a 150 cm long power cable.
- Power switch.

Disk cloning function:
- Cloning takes place without connecting the station to a computer.
- The destination disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started.
- Both HDDs and SSDs can be cloned.
- Cloning starts by pressing the CLONE button for at least 3 seconds.
- 4 LEDs indicate the cloning process and the end of cloning.
- SSD cloning speed up to 300 MB/s.
- The total disk cloning time depends on the capacity of the source disk and not on the amount of disk data.

Supported operating systems:
- MS Windows 7 / 8 / 10 / 11 and above, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and above (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and above, Linux with kernel 2.6.x and higher.
- Note: Drivers are found in operating systems and are installed completely automatically. There is no need to install other drivers and they are not available.

Package contents:
- SSD/HDD dock,
- USB-B USB-A 70 cm cable,
- Power supply 100-240V / 12V-2.5A,
- Installation guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,
- Cardboard box packaging.