Cata - Built -in induction hob insb -6003e2 BK

3 induction cooking zone, Mach2 induction technology, touch control touch control, 9 grade, 1 30 cm, 1 23 cm and 1 18 cm cooking zone, all cooking zones with booster function, 3 cooking functions: melting (45-55ºC), warm-up, warm. (85-95ºC), kid lock, timer, residual heat display, Quick-Fix System, Power: 7.1 kW

Performance:

1 piece of 300 mm zone: 2.3 kW (Booster 3 kW)
1 piece of 230 mm: 2.3 kW (Booster 2.6 kW)
1 piece 180 mm zone: 1.2 kW (Booster 1.5 kW)

New developed Mach2 internal ventilation system for protection of the device and furniture. The extremely quiet axial fan sucks the cool air on a large surface. Then blow it out on the two side -increased ventilation ducts. Thanks to the side terminal, no difficult to form ventilation is required at the beginning of the furniture.

Mach2 induction technology benefits:

Manifestation

Optimized quiet ventilation system. New layout. Instead of the usual two centrifugal fans, a single axial fan with low speed and increased exhaust surface. 6 lower noise levels.

Easy to install

Just insert the hob into the worksheet cut, no screws or tools are required. The fastening clips keep the hob fixed and stable. Only 5 mm is required between the hob and the cabinet/oven. No front fan is required. The hob can be connected to 1.2 and 3 phases.

Continuous steady power

The heat of the cooking surface is so stable that we can reach smooth cooking and baking, use any pot and cook any food. The hob is able to keep high performance.

Reduced and efficient energy consumption

1 liter of water can be boiled in a 20 cm container from 20º for 3 minutes.
(100 g. Pasta, rice ... 2 persons)
1 liter of oil can be heated in a 28 cm pan from 20º to 180º in 5 minutes.
(Ready to bake potatoes)

Automatic vessel sensing speed

The time for the vessel detection is 2-3 seconds at the power level 7 or higher, 3-6 seconds at lower power levels.

Induction hob

The induction hobs take place as a result of the induction of cooking zones. The heat is generated directly at the bottom of the cooking vessel. The induction coils below the cooking zone create a magnetic alternating field due to a high frequency alternating current. Because heating is caused by induction, the hob does not heat up.

Residual hero

Egi warning signal that lights up until the cooking zone cools down.

Continuous performance

Whatever the level of performance we choose during cooking, due to the control of the ceramic base, it remains steady and steady.

Timer

This feature allows the user to set the cooking time on different zones. When the set time is up, the hob will turn off in the escape of a beep.

Automatic off

Turn off the hob after 20 seconds after inactivation.

Booster

A feature is intended to increase the performance of the selected cooking zone. Thus, it boils more, faster.

Quick-Fix System

A quick recording system that facilitates the installation of the hob into the workpult.